Sub-Zero PRO 48 Refrigerator Manual

The Sub-Zero PRO 48 is a premium refrigerator designed for high-performance cooling and preservation of food. It features dual refrigeration systems, advanced temperature control, and a sleek design that fits seamlessly into any kitchen. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water Supply 7. Operating the Refrigerator 8. Accessibility Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Dual refrigeration system, advanced temperature control, stainless steel finish, customizable shelving, and energy-efficient design.

Feature	Description
Dual Refrigeration	Separate systems for refrigerator and freezer for optimal food preservation.
Temperature Control	Precise temperature settings for different food types.
Custom Shelving	Adjustable shelves for flexible storage options.
Energy Efficient	Designed to minimize energy consumption while maximizing performance.
Stainless Steel Finish	Durable and easy to clean surface.

Installation

Ensure proper placement and ventilation. Follow the guidelines for connecting the water supply and electrical requirements.

Remove packaging and inspect the unit.
Position the refrigerator in the desired location.
Connect the water supply line.
Plug into a grounded electrical outlet.

WARNING! Ensure the refrigerator is level and stable to avoid tipping.

First-Time Setup

Power on the refrigerator and set the desired temperatures for the refrigerator and freezer compartments.

Press the power button to turn on the unit.
Set the refrigerator temperature to 37°F and freezer to 0°F.
Allow the refrigerator to cool for several hours before adding food.

CAUTION! Do not overload the refrigerator during the initial cooling period.

Specifications

Model: Sub-Zero PRO 48.
Dimensions: 48 inches wide, 84 inches high, 24 inches deep.
Capacity: 19.5 cu. ft. refrigerator, 8.5 cu. ft. freezer.
Power Source: 115V AC, 60Hz.
Temperature Range: Refrigerator: 34°F to 45°F; Freezer: -5°F to 0°F.
Weight: 800 lbs.
Warranty: 2 years parts and labor, 5 years sealed system.

Controls and Settings

Access temperature settings and features via the digital control panel located on the front of the unit.

Features: Temperature adjustment, energy-saving mode, and diagnostic settings.

Connecting Water Supply

Follow the instructions to connect the refrigerator to the water supply for ice and water dispensing.

Turn off the water supply.
Connect the water line to the refrigerator's inlet valve.
Turn on the water supply and check for leaks.

Tip: Use a water filter for cleaner ice and water.

Operating the Refrigerator

Learn how to use the refrigerator's features for optimal performance.

Adjust temperature settings as needed.
Use the ice maker and water dispenser as per instructions.
Monitor food storage and organization for efficiency.

WARNING! Do not block air vents inside the refrigerator.

Accessibility Features

Features include easy-to-reach controls and adjustable shelving for users with mobility challenges.

Care & Cleaning

Unplug the refrigerator before cleaning. Use a soft cloth and mild detergent.

CAUTION! Do not use abrasive cleaners or solvents.

Regulatory Information

This appliance complies with all applicable safety standards and regulations. For support, visit www.subzero.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Refrigerator not cooling	Power supply issue	Check power connection and circuit breaker.
Ice maker not working	Water supply issue	Ensure water line is connected and turned on.
Noise from refrigerator	Compressor operation	Normal operation; check for loose items.
Frost build-up	Door seal issue	Inspect and replace door seals if damaged.

Reset: Refer to the control panel instructions for resetting features.

Service: 1-800-222-7820; www.subzero.com