Sub-Zero IT-36CI Refrigerator Manual

The Sub-Zero IT-36CI is a 36-inch integrated refrigerator designed for optimal food preservation. It features advanced cooling technology, dual refrigeration systems, and customizable storage options. This manual provides essential information on safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water Supply 7. Operating the Refrigerator 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Dual refrigeration system, adjustable shelves, water filtration system, LED lighting, and touch control panel.

Feature	Description
Dual refrigeration	Maintains optimal humidity and temperature for food preservation
Adjustable shelves	Customizable storage for various food items
Water filtration system	Provides clean and fresh water for ice and beverages
LED lighting	Bright and energy-efficient interior lighting
Touch control panel	Easy-to-use interface for temperature and settings adjustments

Installation

Ensure proper placement and ventilation for optimal performance.

Remove packaging and inspect the refrigerator.
Position the refrigerator in a suitable location with adequate clearance.
Connect the water supply line if applicable.
Plug into a grounded electrical outlet.

WARNING! Ensure the refrigerator is level to avoid operational issues.

First-Time Setup

Power on the refrigerator and follow the on-screen prompts.

Set the desired temperature for the refrigerator and freezer compartments.
Allow the refrigerator to cool for several hours before adding food.
Configure any additional settings via the touch control panel.

CAUTION! Avoid overloading the refrigerator during the initial setup.

Specifications

Model: IT-36CI
Dimensions: 36" W x 84" H x 24" D
Cooling System: Dual refrigeration
Energy Consumption: 600 kWh/year
Temperature Range: 34°F to 40°F for refrigerator; 0°F to 5°F for freezer
Water Supply: Requires connection for ice maker
Power Source: 115V AC, 60Hz

Controls and Settings

Access temperature settings via the touch control panel. Features include temperature adjustment, energy-saving mode, and filter status notifications.

Connecting Water Supply

Follow these steps to connect the water supply for the ice maker.

Locate the water supply line and shut off the main water supply.
Connect the water line to the refrigerator's inlet valve.
Turn on the main water supply and check for leaks.

Tip: Use a water filter for better quality ice and water.

Operating the Refrigerator

Learn how to effectively use the refrigerator's features.

Adjust temperature settings as needed.
Utilize the adjustable shelves for optimal storage.
Monitor the water filter status and replace as necessary.

WARNING! Do not block air vents inside the refrigerator.

Maintenance and Care

Regular maintenance ensures optimal performance.

Clean the interior with a mild detergent and water.
Check and replace the water filter every 6 months.
Inspect door seals for proper sealing.

CAUTION! Unplug the refrigerator before performing maintenance.

Regulatory Information

This refrigerator complies with all applicable safety standards and regulations. For support, visit www.subzero.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Refrigerator not cooling	Power supply issue	Check power connection and reset if necessary.
Water leak	Loose water connection	Tighten connections and check for damage.
Ice maker not working	Water supply issue	Ensure water line is connected and turned on.
Noise from refrigerator	Improper leveling	Adjust feet to level the refrigerator.

Reset: Refer to the control panel instructions for resetting settings.

Service: For assistance, contact Sub-Zero customer service.