Sub-Zero ID-27R Refrigerator Manual

The Sub-Zero ID-27R is a built-in refrigerator designed to provide optimal food preservation with advanced cooling technology. It features dual refrigeration systems, a sleek design that integrates seamlessly into your kitchen, and customizable storage options. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water Supply 7. Operating Instructions 8. Accessibility Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Dual refrigeration system, adjustable shelves, water filtration system, LED lighting, and a touch control panel.

FeatureDescription
Dual refrigerationMaintains optimal humidity and temperature for both fresh and frozen foods.
Adjustable shelvesCustomizable storage options for various food items.
Water filtrationProvides clean and fresh water for ice and drinking.
LED lightingBright and energy-efficient lighting for better visibility.
Touch control panelUser-friendly interface for temperature and settings adjustments.

Installation

Ensure proper placement and ventilation for optimal performance.

  1. Remove packaging and inspect the unit for damage.
  2. Position the refrigerator in a well-ventilated area.
  3. Connect the water supply line to the refrigerator.
  4. Plug the unit into a grounded electrical outlet.

WARNING! Ensure the refrigerator is level to avoid operational issues.

First-Time Setup

Power on the refrigerator and follow the setup instructions on the display.

  1. Set the desired temperature for the refrigerator and freezer compartments.
  2. Activate the water filtration system if applicable.
  3. Allow the refrigerator to cool for several hours before adding food.

CAUTION! Do not overload the refrigerator during the initial setup.

Specifications

Controls and Settings

Access temperature settings and features via the touch control panel located on the front of the unit.

Settings: Temperature adjustments, filter status, and diagnostic information.

Connecting Water Supply

Ensure a proper connection to the water supply for ice and water dispensing.

  1. Locate the water inlet valve on the back of the refrigerator.
  2. Connect the water supply line securely.
  3. Turn on the water supply and check for leaks.

Tip: Use a water filter for better quality water.

Operating Instructions

Follow these instructions for optimal use of your refrigerator.

  1. Regularly check and adjust temperature settings as needed.
  2. Keep the refrigerator organized for efficient airflow.
  3. Clean the condenser coils periodically for better efficiency.

WARNING! Do not block air vents inside the refrigerator.

Accessibility Features

The refrigerator includes features to assist users with disabilities, including easy-to-reach controls and adjustable shelving.

Care & Cleaning

Unplug the refrigerator before cleaning. Use a mild detergent and warm water for the exterior.

CAUTION! Avoid using harsh chemicals or abrasive materials.

Regulatory Information

This appliance complies with all applicable safety standards and regulations. For support, visit www.subzero.com or contact customer service.

Troubleshooting

SymptomPossible CauseCorrective Action
Refrigerator not coolingPower supply issueCheck power connection and circuit breaker.
Water dispenser not workingClogged filterReplace water filter and check connections.
Ice maker not producing iceWater supply issueEnsure water supply is connected and turned on.
Noise from the unitImproper levelingAdjust the feet to level the refrigerator.
Frost buildupDoor seal issueCheck door seals for damage and replace if necessary.

Reset: Refer to the user manual for reset instructions.

Service: For assistance, contact Sub-Zero customer service.

Sub-Zero ID-27R Refrigerator Manual © - All Rights Reserved 2026