Sub-Zero CL4850SDST Refrigerator Manual

The Sub-Zero CL4850SDST is a premium 48-inch built-in refrigerator designed to provide superior food preservation and storage. It features dual refrigeration systems, advanced temperature control, and a sleek stainless steel finish. The refrigerator includes adjustable shelving, a water filtration system, and an ice maker, ensuring convenience and efficiency. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water Supply 7. Using the Ice Maker 8. Accessibility Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Dual refrigeration system, adjustable shelves, water filtration, ice maker, LED lighting.

FeatureDescription
Dual refrigerationSeparate systems for refrigerator and freezer for optimal food preservation
Adjustable shelvesCustomizable storage options for various food items
Water filtrationEnsures clean and fresh water for ice and drinking
Ice makerProduces clear, restaurant-quality ice
LED lightingBright, energy-efficient lighting for easy visibility

Installation

Ensure proper installation for optimal performance. Follow the guidelines below.

  1. Choose a location with adequate ventilation and access to a water supply.
  2. Level the refrigerator using adjustable legs.
  3. Connect the water supply line to the refrigerator.
  4. Plug into a grounded electrical outlet.

WARNING! Ensure the refrigerator is securely installed to prevent tipping.

First-Time Setup

Power on the refrigerator and follow the on-screen prompts for initial setup.

  1. Set the desired temperature for both refrigerator and freezer compartments.
  2. Activate the water filtration system.
  3. Allow the refrigerator to cool for several hours before adding food.

CAUTION! Do not overload the refrigerator during initial cooling.

Specifications

Controls and Settings

Access the control panel for temperature settings and ice maker operation.

Features: Digital display, temperature adjustment buttons, ice maker on/off switch.

Connecting Water Supply

Ensure proper connection to the water supply for ice maker functionality.

  1. Locate the water supply valve and turn it off.
  2. Connect the water line to the refrigerator's inlet.
  3. Turn on the water supply and check for leaks.

Tip: Use a water filter for optimal ice quality.

Using the Ice Maker

Learn how to operate the ice maker effectively.

  1. Ensure the water supply is connected and turned on.
  2. Press the ice maker switch to the ON position.
  3. Monitor ice production and adjust settings as needed.

WARNING! Do not block the ice maker's vents.

Accessibility Features

Features include adjustable shelving and easy-to-reach controls for user convenience.

Care & Cleaning

Unplug the refrigerator before cleaning. Use a soft cloth and mild detergent.

CAUTION! Avoid abrasive cleaners that may scratch surfaces.

Regulatory Information

This appliance complies with all applicable safety standards and regulations. For support, visit www.subzero.com or contact 1-800-222-7820.

Troubleshooting

SymptomPossible CauseCorrective Action
Refrigerator not coolingPower supply issueCheck power connection and reset circuit breaker.
Ice maker not producing iceWater supply issueEnsure water line is connected and valve is open.
Noise from refrigeratorCompressor operationNormal operation; check for loose items inside.
Frost build-upDoor seal issueInspect door seals for damage; replace if necessary.

Reset: Refer to the control panel for reset options.

Service: 1-800-222-7820; www.subzero.com

Sub-Zero CL4850SDST Refrigerator Manual © - All Rights Reserved 2026