Sub-Zero CL4850SD-S-P Refrigerator Manual

The Sub-Zero CL4850SD-S-P is a premium 48-inch built-in refrigerator designed to provide optimal food preservation with advanced cooling technology. It features dual refrigeration systems, an intuitive touch control panel, and customizable shelving options. The refrigerator is equipped with an ice maker, water filtration system, and energy-efficient LED lighting. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water Supply 7. Using the Ice Maker 8. Accessibility Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Dual refrigeration system, Touch control panel, Customizable shelving, Ice maker, Water filtration system.

Feature	Description
Dual refrigeration	Maintains optimal humidity and temperature for food preservation
Touch control panel	User-friendly interface for temperature and settings adjustment
Customizable shelving	Flexible storage options to accommodate various food items
Ice maker	Produces clear ice cubes on demand
Water filtration	Ensures clean and fresh water supply for ice and drinking
LED lighting	Bright and energy-efficient lighting for better visibility

Installation

Ensure proper placement and leveling of the refrigerator. Follow the manufacturer's guidelines for installation.

Remove packaging and inspect for damage.
Position the refrigerator in the desired location, ensuring adequate ventilation.
Connect the water supply line to the refrigerator.
Plug into a grounded electrical outlet.

WARNING! Ensure the refrigerator is securely positioned to avoid tipping.

First-Time Setup

Power on the refrigerator and follow the on-screen prompts to configure settings.

Set temperature for refrigerator and freezer compartments.
Activate the ice maker and water filter.
Adjust shelving and storage as needed.

CAUTION! Allow the refrigerator to stabilize before loading with food.

Specifications

Model: CL4850SD-S-P.
Dimensions: 48 inches wide, 24 inches deep, 84 inches high.
Cooling System: Dual refrigeration.
Energy Efficiency: ENERGY STAR certified.
Ice Maker: Yes, with water filtration.
Lighting: LED interior lighting.
Temperature Range: 34°F to 45°F for refrigerator; -5°F to 0°F for freezer.

Controls and Settings

Access settings via the touch control panel. Adjust temperature, ice maker settings, and lighting.

Features: Temperature control, Ice maker on/off, Lighting control.

Connecting Water Supply

Ensure proper connection to the water supply for the ice maker.

Turn off the water supply before connecting.
Use a 1/4-inch water line for connection.
Check for leaks after connection.

Tip: Use a water filter for better ice quality.

Using the Ice Maker

The ice maker produces clear ice cubes for beverages.

Ensure the ice maker is activated.
Check the water supply connection.
Monitor ice levels and adjust settings as needed.

WARNING! Do not overload the ice bin; it may cause jams.

Accessibility Features

Touch control panel is designed for ease of use. Ensure all controls are accessible.

Care & Cleaning

Unplug before cleaning. Use a soft cloth and mild detergent; avoid abrasive cleaners.

CAUTION! Do not use sharp objects that may scratch surfaces.

Regulatory Information

This appliance complies with all applicable safety standards and regulations. For support, visit www.subzero.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Refrigerator not cooling	Power supply issue	Check power connection and circuit breaker.
Ice maker not producing ice	Water supply issue	Ensure water line is connected and turned on.
Unusual noise	Improper leveling	Adjust the refrigerator's leveling feet.
Frost buildup	Door seal issue	Check door seals for damage and ensure they close properly.

Reset: Refer to the user manual for reset instructions.

Service: Contact Sub-Zero customer support for assistance.