Sub-Zero 685-S Refrigerator Manual

The Sub-Zero 685-S is a high-performance refrigerator designed for optimal food preservation. It features dual refrigeration systems, advanced temperature control, and a sleek design that fits seamlessly into any kitchen. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water Supply 7. Operating Instructions 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Dual refrigeration system, adjustable shelving, water filtration system, ice maker, and customizable temperature settings.

Feature	Description
Dual Refrigeration	Separate systems for refrigerator and freezer for optimal food preservation
Adjustable Shelving	Flexible shelving options for customized storage
Water Filtration	Built-in water filter for clean and fresh ice and water
Ice Maker	Automatic ice maker with storage bin
Temperature Control	Precise temperature settings for different food types

Installation

Ensure proper installation for optimal performance. Follow the guidelines below.

Choose a location with adequate ventilation.
Connect the water supply line to the refrigerator.
Level the refrigerator using adjustable feet.
Plug into a grounded electrical outlet.

WARNING! Ensure the refrigerator is securely installed to avoid tipping.

First-Time Setup

Power on the refrigerator and follow the setup instructions on the display.

Set the desired temperature for both the refrigerator and freezer.
Activate the water filter and ice maker.
Allow the refrigerator to reach the set temperature before loading food.

CAUTION! Avoid overloading the refrigerator during initial setup.

Specifications

Model: Sub-Zero 685-S
Dimensions: 68" H x 30" W x 24" D
Capacity: 23 cu. ft. total
Power Supply: 115V AC, 60Hz
Weight: 250 lbs
Temperature Range: 34°F to 40°F for refrigerator; 0°F for freezer
Water Supply: Requires 1/4" water line connection

Controls and Settings

Access the control panel to adjust settings for temperature and ice maker operation.

Control Panel: Digital display for temperature settings, ice maker control, and filter status.

Connecting Water Supply

Follow these steps to connect the water supply for the ice maker.

Locate the water supply valve under the sink.
Attach the water line to the refrigerator's water inlet.
Turn on the water supply and check for leaks.

Tip: Use a water filter for better quality ice and water.

Operating Instructions

Learn how to operate your Sub-Zero refrigerator effectively.

Adjust temperature settings as needed.
Monitor the ice maker and refill water as necessary.
Regularly check the filter status and replace when needed.

WARNING! Do not block air vents inside the refrigerator.

Maintenance and Care

Keep your refrigerator in top condition with regular maintenance.

Clean the exterior with a soft cloth.
Defrost the freezer if ice buildup occurs.
Replace the water filter every 6 months.

CAUTION! Unplug the refrigerator before performing maintenance.

Regulatory Information

This refrigerator complies with all applicable safety and performance standards. For more information, visit the manufacturer's website.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Refrigerator not cooling	Power supply issue	Check power connection and reset circuit breaker.
Ice maker not working	Water supply issue	Ensure water line is connected and valve is open.
Excessive frost buildup	Door seal issue	Check door seals for damage and replace if necessary.
No water from dispenser	Clogged filter	Replace water filter and check for kinks in the line.

Reset: Use the control panel to reset settings if needed.

Service: Contact customer support for further assistance.