Sub-Zero 2241 Refrigerator Manual

The Sub-Zero 2241 is a premium built-in refrigerator designed to provide optimal food preservation with advanced cooling technology. It features dual refrigeration systems, a stainless steel finish, adjustable shelving, and a water filtration system. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water Supply 7. Operating the Refrigerator 8. Accessibility Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Dual refrigeration system, stainless steel finish, adjustable shelves, water filtration system, and energy-efficient design.

Feature	Description
Dual Refrigeration	Separate systems for refrigerator and freezer for optimal food preservation
Adjustable Shelves	Customizable shelving for flexible storage options
Water Filtration	Built-in filtration system for clean drinking water and ice
Energy Efficient	Designed to minimize energy consumption while maximizing performance
Stainless Steel Finish	Durable and easy to clean surface

Installation

Ensure proper installation for optimal performance. Follow these steps:

Unpack and inspect the refrigerator.
Position the refrigerator in the desired location, ensuring adequate ventilation.
Connect the water supply line to the refrigerator.
Plug into a grounded electrical outlet.

WARNING! Ensure the refrigerator is level and secure to avoid tipping.

First-Time Setup

Power on the refrigerator and follow the on-screen prompts for initial setup.

Set the desired temperature for both refrigerator and freezer compartments.
Activate the water filtration system.
Allow the refrigerator to cool for several hours before adding food.

CAUTION! Avoid overloading the refrigerator to ensure proper airflow.

Specifications

Model: Sub-Zero 2241.
Dimensions: 24 inches wide, 84 inches high, 24 inches deep.
Cooling System: Dual refrigeration.
Energy Consumption: 600 kWh/year.
Water Filtration: Built-in water filter.
Temperature Range: 34°F to 40°F for refrigerator; -5°F to 0°F for freezer.
Finish: Stainless steel.

Controls and Settings

Access temperature settings via the digital control panel located on the front of the refrigerator.

Features: Temperature adjustment, water filter status, and energy-saving mode.

Connecting Water Supply

Follow these steps to connect the water supply:

Locate the water supply line and shut off the main water supply.
Connect the water line to the refrigerator's inlet valve.
Turn on the water supply and check for leaks.

Tip: Use a water filter for clean and safe drinking water.

Operating the Refrigerator

To operate the refrigerator:

Adjust the temperature settings as needed.
Monitor the water filter status and replace as necessary.
Keep the refrigerator door closed to maintain temperature.

WARNING! Do not block air vents inside the refrigerator.

Accessibility Features

The Sub-Zero 2241 includes features for enhanced accessibility, such as easy-to-reach controls and adjustable shelving for convenience.

Care & Cleaning

Unplug the refrigerator before cleaning. Use a soft cloth and mild detergent; avoid abrasive cleaners.

CAUTION! Do not use harsh chemicals or solvents.

Regulatory Information

This appliance complies with all applicable safety standards and regulations. For support, visit www.subzero.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Refrigerator not cooling	Power supply issue	Check power connection and circuit breaker.
Water filter indicator on	Filter needs replacement	Replace water filter as per instructions.
Noise from refrigerator	Compressor operation	This is normal; ensure refrigerator is level.
Frost buildup in freezer	Door not sealing	Check door seals for damage and clean if necessary.

Reset: Refer to the control panel instructions for resetting settings.

Service: For assistance, contact Sub-Zero customer service.